Type SL – Type S with flange for motor mounting

Type SL – Type S with flange for motor mounting
FEATURES
Nominal gear ratios: i = 10:1 up to 83:1
Maximum output torque: 1765 Nm
5 sizes, centre-to-centre distance from 040 up to 100 mm
Low-backlash design: less than 6 angular minutes possible
Suitable for the mounting of IEC standard motors
Drive side with hollow-bored shaft and flange
Housing made of grey cast iron

CONSTRUCTION TYPES

GEARBOX SIDES

ORDER CODE

Type	Size	Gear ratio	Construction type	Fixing side	Installation position	Speed n2	Design
SL	063	10:1	B0-	1.	1-	150	/0000
Description	Centre-to-centre distance A; Table 9.4.5‑1	Table 9.4.5‑1	Figure 9.4.2‑1; Construction types	Side to which fixing is made. Table 9.2.3‑1 Figure 4.2.1‑1 Gearbox sides	Side pointing downwards Figure 4.2.1‑1 Gearbox sides	Slowly-rotating shaft Table 9.4.5‑1	Standard
	D120	/14×30
	Flange diameter

TYPE OVERVIEW